• banner 8

Introduction of High purity PSA Nitrogen Generator

PSA Nitrogen Generator

Information of PSA Nitrogen Generator

Principle: Pressure swing adsorption uses carbon molecular sieve as the adsorbent for nitrogen production. Under a certain pressure, the carbon molecular sieve can adsorb more oxygen in the air than nitrogen. Therefore, through the programmable control of the opening and closing of the pneumatic valve, the two towers A and B can alternately cycle, pressurized adsorption, reduced pressure desorption, and complete oxygen Nitrogen is separated to obtain nitrogen with the required purity;
Purpose: Nitrogen protection for reflow soldering furnace to prevent oxidation reaction of electronic boards, etc.; protection of voltage gas in short-circuit devices, large-scale integrated circuits, color and black-and-white kinescopes, TV sets and tape recorders, and semiconductors and electrical appliances. Gas, laser drilling and other electrical components production atmosphere.
Technical Specification:
Flow rate: 1~2000Nm/h ·Purity: 99%-99.9999%, oxygen content ≤1ppm
Pressure: 0.05~0.8Mpa · Dew point: ≤-80℃

PSA Oxygen Plant


Post time: Dec-29-2021