High pressure 87MPA oil-free hydrogen compressor for hydrogen refueling station

Short Description:

Type: GD Vertical opposite balance

stroke: 130mm-210mm

Max piston force: 40KN-160KN

Max discharge pressure: 100Mpa

Flow range: 30-2000Nm3/h

Motor power: 22kw-200kw

Speed: 420rpm

Cooling method: air/water cooling

Send email to us

Product Detail

Product Tags

Diaphragm compressor according to the needs of the user, choose the right type of compressor to meet the needs of the user. The diaphragm of the metal diaphragm compressor completely separates the gas from the hydraulic oil system to ensure the purity of the gas and no pollution to the gas. At the same time, advanced manufacturing technology and accurate membrane cavity design technology are adopted to ensure the service life of the diaphragm compressor diaphragm. No pollution: the metal diaphragm group completely separates the process gas from the hydraulic oil and lubricating oil parts to ensure the gas purity.

Product description
Main Structure
Diaphragm compressor structure is mainly composed of motor, base, crankcase, crankshaft linkage mechanism, cylinder components, crankshaft connecting rod, piston, oil and gas pipeline, electric control system and some accessories.

Gas Media type
Our compressors can compress ammonia, propylene, nitrogen, oxygen, helium, hydrogen, hydrogen chloride, argon, hydrogen chloride, hydrogen sulfide, hydrogen bromide, ethylene, acetylene, etc.(Nitrogen diaphragm compressor,bottle filling compressor,oxygen diaphragm compressorGD Model Instruction

GD diaphragm compressor is a special structure of the volumetric compressor, is the highest level of compression in the field of gas compression, this compression method Without secondary pollution, it can ensure the purity of gas is more than 5, and it has very good protection against compressed gas. It has the characteristics of large compression ratio, good sealing performance, and the compressed gas is not polluted by lubricating oil and other solid impurities. Therefore, it is suitable for compressing high-purity, rare and precious, flammable, explosive, toxic, harmful, corrosive and high-pressure gases. The compression method is generally specified in the world for compressing high-purity gas, flammable and explosive gas, toxic gas and oxygen. Etc. (such as nitrogen diaphragm compressor, oxygen diaphragm compressor, hydrogen sulfide diaphragm compressor, argon diaphragm compressor, etc.).
GD diaphragm compressor for my company independent research and development of large diaphragm compressor, its advantages are: high compression ratio, large displacement, large piston force, stable running, high exhaust pressure, etc, has been widely used and petroleum chemical industry and nuclear power plant, and so on,.Two GD type diaphragm compressor cylinder arrangement for symmetrically arranged in parallel, more suitable for the petrochemical and nuclear power plant such as uninterrupted operation for a long time, because of the cylinder body symmetry, run up against other arrangement of diaphragm compressor is the most stable operation, running, small vibration from the ground clearance is more convenient in maintenance.

Application
Food industry, petroleum industry, chemical industry, electronics industry, nuclear power plant, aerospace, medicine, scientific research.

Outlet pressure at 50bar 200 bar, 350 bar (5000 psi), 450 bar, 500 bar, 700 bar (10,000 psi), 900 bar (13,000 psi) and other pressure can be customized .

Product features:
1. Good sealing performance:
Diaphragm compressor is a kind of special structure positive displacement compressor, the gas does not need lubrication, good sealing performance, the compression medium does not contact with any lubricant, will not produce any contamination in the compression process, Especially suitable for high purity (99.9999% above), rare, highly corrosive, toxic ,harmful, flammable , explosive and radioactive gas compression, transportation and bottle filling.

2.Cylinder heat dissipation performance is good:
Compressor cylinder heat dissipation performance is good, close to is other mal compression, can use high compression ratio, suitable for compression of high pressure gas.

Technological advantage
1, Low of speed prolong the service life of wearing parts. The new membrane cavity curve improves the volume efficiency.optimizes the gas valve profile, and the diaphragm adopts a special heat treatment method, greatly prolongs the service life.

2, the use of high efficiency cooler, so that the temperature is low, high efficiency, can properly extend the life of lubricating oil, O-ring, valve spring. Under the condition of meeting the technological parameters, the structure is more advanced, reasonable and energy saving.

3, the cylinder head using Mosaic double O-ring seal, its sealing effect is far better than open head.

4, diaphragm rupture alarm structure advanced, reasonable, reliable, diaphragm installation is non-directional, easy to replace.

5. The parts of the whole equipment are concentrated on a common skid which is easy to transport, install and operation.

How does a diaphragm compressor work?
A diaphragm compressor is a variant of the classic reciprocating compressor with backup and piston rings and rod seal. The compression of gas occurs by means of a flexible membrane, instead of an intake element. The back and forth moving membrane is driven by a rod and a crankshaft mechanism.

Advantages

Good Sealing Performance .
Cylinder has good heat dissipation performance .
Completely Oil-free , the gas purity can be guaranteed to be higher than 99.999% .
High Compression Ratios, High discharge pressure up to 1000bar .
Long service life ,more than 20 years .

Lubrication includes : oil free lubrication and splash lubrication
Cooling method includes: Water cooling and air cooling.
Type includes: V-type, W-type,D-type,Z-type

45MPa diaphragm compressor for hydrogenation station
capacity （Kg/d）	Model	inlet pressure （MPa）	outlet pressure （MPa）	flow (Nm3/h)
100	GZ-100/125-450	5.0~20	45	100
200	GZ-200/125-450	5.0~20	45	200
300	GZ-350/125-450	5.0~20	45	350
500	GD-500/125-450	5.0~20	45	500
1000	GD-1000/125-450	5.0~20	45	1000

87MPa diaphragm compressor for hydrogenation station
capacity （Kg/d）	Model	inlet pressure （MPa）	outlet pressure （MPa）	flow (Nm3/h)
200	GZ-200/200-870	20	87	200
200	GD-200/150-1000	10~20	100	200
500	GD-500/150-1000	10~20	100	500
800	GD-800/150-1000	10~20	100	500

diaphragm compressor Hydrogen filling
Model	inlet pressure （MPa）	outlet pressure （MPa）	flow (Nm3/h)	motor power (KW)
GD-170/17-220	1.7	22	170	37
GD-220/17-220	1.7	22	220	45
GD-360/17-220	1.7	22	360	75
GD-420/18-220	1.8	22	420	90
GD-650/19-220	1.9	22	650	132
GD-1000/19-220	1.9	22	1000	185

Diaphragm compressor for on-site hydrogenation station
Model	inlet pressure （MPa）	outlet pressure （MPa）	flow (Nm3/h)	motor power (KW)
GD-100/15-220	1.5	22	100	37
GD-150/15-450	1.5	45	150	45
GD-220/15-450	1.5	45	220	75
GD-240/15-450	1.5	45	240	90
GD-350/15-450	1.5	45	350	132
GD-620/15-450	1.5	45	620	185

Company strength display

After Sales Service
1.Quick response within 2 to 8 hours, with a reaction rate exceeding 98%;
2. 24-hour telephone service, please feel free to contact us;
3. The whole machine is guaranteed for one year (excluding pipelines and human factors);
4. Provide consulting service for the service life of the whole machine, and provide 24-hour technical support via email;
5. On-site installation and commissioning by our experienced technicians;